Frënn vun der Ënn A.S.B.L.
Luxembourg based non-profit organization defending civil rights on the internet.
User Tools
Sidebar
server-setup
Table of Contents
Server Setup
Requirements
Here are some minimum requirements you absolutely need to run a node.
Exits
1024 mb RAM 5 GB Diskspace Dualcore
With this setup you can run a 50 mbit/s relay without running out of space or memory. To run anything faster you need at least twice as much power.
Gigabit servers should at least have the following settings
8 GB RAM 30 GB Diskspace Octocore (with AES-NI enabled)
Relays
2048 mb RAM 5 GB Diskspace Dualcore
Relay setups need nearly the same requirements as Exit Nodes.
Bridges
128 mb RAM 2 GB Diskspace Singlecore
A Bridge doesn't need much of anything. Some more RAM could be useful if you decide to run more than one Bridge on the server. Nodes
If you get an SSL/TLS error while using wget to download our scripts from bitbucket, then you have to use the –no-check-certificate option!
Exit Nodes
First Step:
apt-get install build-essential echo "deb http://deb.torproject.org/torproject.org <DISTRIBUTION> main" >> /etc/apt/sources.list gpg --keyserver keyserver.c3l.lu --recv 886DDD89 gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | apt-key add - apt-get update apt-get install deb.torproject.org-keyring apt-get install torSecond Step:
apt-get install openssl libssl-dev cpan cpan> install Net::Address::IP::Local Net::SSLeay IO::Socket::SSL LWP::Protocol::https WWW::Mechanize wget https://bitbucket.org/fvde/tor-autoconfig/raw/tip/autoconf.pl perl autoconf.pl exit [YOUR-NODE-NICKNAME] [NETWORK SPEED] [METERED|UNMETERED] ([TRAFFIC LIMIT]) wget -O /root/family_updater.pl https://bitbucket.org/fvde/tor-autoconfig/raw/tip/family_updater.pl crontab -e
*/10 * * * * perl /root/family_updater.pl
service tor restart wget -O /root/update_server.pl https://bitbucket.org/virii/update-ennstatus/raw/tip/update_server.pl perl /root/update_server.pl [torrc] ([torrc2]) ([torrc3]) crontab -e
*/10 * * * * perl /root/update_server.pl torrc
Third Step:
apt-get install iftop htop python-pip pip install nyx wget https://download.adamas.ai/dlbase/Stuff/sthttpd/sthttpd-2.27.0.tar.gz tar -zxvf sthttpd-2.27.0.tar.gz cd sthttpd-2.27.0 adduser thttpd ./configure make make install wget -O /etc/thttpd.conf https://exit-install.enn.lu/thttpd.conf mkdir /var/www wget -O /etc/init.d/thttpd https://exit-install.enn.lu/thttpd.init chmod 0755 /etc/init.d/thttpd service thttpd startForth Step:
apt-get install vnstati cd /var/www touch vnstat.png vnstat_d.png vnstat_m.png vnstat.xml crontab -u thttpd -e
*/10 * * * * /usr/bin/vnstati -vs -o /var/www/vnstat.png -i eth0 >/dev/null 2>&1 ;
*/10 * * * * /usr/bin/vnstati -d -o /var/www/vnstat_d.png -i eth0 >/dev/null 2>&1 ;
1 3 * * * /usr/bin/vnstati -m -o /var/www/vnstat_m.png -i eth0 >/dev/null 2>&1 ;
1 3 * * * /usr/bin/vnstat –xml > /var/www/vnstat.xml 2>/dev/null ;
vnstat -u -i eth0 wget -O /var/www/index.html https://exit-install.enn.lu/exit-node.html chown -R thttpd:thttpd /var/wwwFifth Step:
Control your torrc. A functional Exit torrc has to look like this!
service tor restart
Bridges
First Step:
apt-get install build-essential python-dev python-pip libgmp-dev apt-get install golang echo "deb https://deb.torproject.org/torproject.org <DISTRIBUTION> main" >> /etc/apt/sources.list echo "deb https://deb.torproject.org/torproject.org tor <DISTRIBUTION> main" >> /etc/apt/sources.list echo "deb https://deb.torproject.org/torproject.org obfs4proxy main" >> /etc/apt/sources.list curl https://deb.torproject.org/torproject.org/A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89.asc | gpg --import gpg --export A3C4F0F979CAA22CDBA8F512EE8CBC9E886DDD89 | apt-key add - apt-get update apt-get install deb.torproject.org-keyring apt-get install tor nyx obfsproxy obfs4proxy fteproxySecond Step:
apt-get install openssl libssl-dev cpan cpan> install Net::Address::IP::Local Net::SSLeay IO::Socket::SSL LWP::Protocol::https WWW::Mechanize wget https://bitbucket.org/fvde/tor-autoconfig/raw/tip/autoconf.pl perl autoconf.pl bridge [YOUR-NODE-NICKNAME] [NETWORK SPEED] [METERED|UNMETERED] ([TRAFFIC LIMIT]) wget -O /root/update_server.pl https://bitbucket.org/virii/update-ennstatus/raw/tip/update_server.pl crontab -e
*/10 * * * * perl /root/update_server.pl torrc
Third Step:
Control your torrc. A functional Bridge torrc has to look like this!
service tor restart
Multiple Tor Processes
wget https://bitbucket.org/fvde/tor-autoconfig/raw/tip/autoconf.pl perl autoconf.pl bridge [TEXTFILE-CONTAINING-NAMES] [NETWORK SPEED] [METERED|UNMETERED] ([TRAFFIC LIMIT])
There is a modified initscript that makes it easy to manage multiple Tor configurations on one machine.
cd /etc/init.d wget -O tor https://exit-install.enn.lu/tor.initd chmod +x tor
Starts/Stops multiple tor configs. Like torrc0 torrc1 torrc2
server-setup.txt · Last modified: 2019/03/06 16:40 by virii
Except where otherwise noted, content on this wiki is licensed under the following license: CC Attribution-Share Alike 4.0 International
